On Thursday morning (that’s Day 9 to LOM training dig enthusiasts) we received a forwarded email from an amateur photographer, Dean Barkley, who carries out low level aerial photography using a quadcopter rigged with a digital camera and was keen to work with archaeological sites.
With a remarkable stroke of coincidence Dean lives in Manston, a short distance form our site and we took a chance on emailing him to see if he would like to visit and photograph our site. Dean visited on Friady morning to show us the equipment but we faced the slight problem that our site was directly under the flight path of Manston airfield, as you will have seen from previous posts. Flights with such an aircraft would not be allowed in the flight path without permission. The good news was that after negotiating with Manston Operations, the control tower did give Dean permission for a flight on Saturday morning which resulted in some stunning images of the excavation. It made all the hard work to clean the site for our final photographs worthwhile and rounded off two weeks with a spectacular flourish.
One could say it put the icing on the cake, but that talent lay elsewhere on Friday and provided us with a few preliminary spectacular flourishes!
The last day of the dig has finally arrived. Time to tidy everything up, make sure all the recording is done and finally clear the site for a set of final photographs. Sounds easy?
It is our belief that on an archaeological excavation the last 10% of the work counts for 80% of the information that will eventually be published. The lovely set of final photographs showing all the excavated area in pristine condition, the records of the areas you have been chewing away at without resolving them until the last few hours. All those jobs you put off ; leave recording that section for later, take that photograph later. All these loose ends must be tied up as the site will be over, later has arrived and there is no more later to be had.
All this leads to the state known as ‘final panic’ which coincides with packing up tools equipment and the site cabin as well as resolving difficult stratigraphic issues in the plans and sections.
So, suffice it to say that this final day’s journal entry will be relatively short. All areas are completed, all segments through the ring ditch and deep area have been finished, all the finds are bagged and all the drawing is done.
Keep following the journal over the next weeks to find out what the excavation revealed and to see find out more about the site, its context and the process of excavation on our Trust for Thanet Archaeology and University of Kent training excavation.
It just remains to thank in no particular order Marie-Claire, Emma, Gabby, Scott, Kaneez and Emily from the University of Kent for their hard work and dedication over the ten days and for doing justice to this important site. Also Maggy, John, Niccy and Margaret of the Isle of Thanet Archaeological society, our junior volunteer Katherine and also Simon and Adam for the Trust for their great efforts during the dig. We would like to thank the University of Kent for funding the training excavation and allowing students to have an opportunity to take part in field work on this historic site. We would also like to express our appreciation to the landowner Mr. David Steed for once again indulging archaeologists in their passion for the past on his land.
The project is dedicated to the memory of Dr. David Perkins, the Trust’s first director, in whose pioneering footsteps we have worked during the last two weeks.
Keep following the progress of the analysis of the site here…
Another hot day today with blustery wind blowing dust over everyone.
Today segment three, excavated through the northern end of the ring ditch was completed, showing another wide, straight sided profile with a flat base. On the eastern side the ditch is cut by another later feature, which reduced the chalk geology to a considerable depth, truncating the east side of the ring ditch.
The later feature could not be explored further because of the limit of excavation in the trench. In the lowest fill the few finds included a cattle vertebra, located at a similar level within the ditch fills as the skull that was found a few days ago. A struck flint was found in the primary silting right on the base of the ditch cut.
The first and second segments were planned using a plot of an EDM survey which recorded strings of points along the the breaks of slope that defined the features. The survey plot was used as a base plan over which a hachured scale drawing was made on drawing film. When the drawing was completed, the overlaid plan was marked with the numbers assigned to the various features cut into the chalk geology.
The third completed segment will be surveyed and planned in a similar way tomorrow on our last working day on site at Lord of the Manor.
Over the day we were assisted by a young volunteer who took part in the excavation, emptied barrows and processed the pottery sherds we have collected from the excavation and from the spoil around the site. The extra help was very welcome at this stage in our project.
More steady progress was made in the deep feature at the southern end of the trench. A segment cut in from the west side is showing another steep sided profile, and at the limit of the days digging, the upper fill of another curvilinear cut at the base of the segment, probably an inter-cutting pit. At the northern edge, the truncated crest of the ring ditch cut has been traced further were it underlies the later feature. This allows us to trace an accurate plan of the ring ditch circuit as far as possible under the later deposits. As these features are often very regular in plan it is likely the ditch can be accurately projected in the final site plans. On our final day on Friday we will record and survey the segments excavated into the feature, recording the small keyhole insights into the shape and depth of the feature.
Today we turned our attention to another part of our excavation area where we had not yet done any work during this project. We began a digital survey with the EDM of a group of graves belonging to an important early Anglo-Saxon cemetery which had been fully excavated in 1982, leaving only the empty grave cuts showing in the hard chalk geology. The small scale composite plan of the cemetery, which is the only record we have of the layout of the graves, has proved to have significant inaccuracies in the representation of form and distribution of the graves. The small scale plan was consulted to determine the number that had been assigned to the grave cut in the earlier excavation, then the grave was surveyed with the EDM using the staff and prism to trace the outline of the upper and lower breaks of slope of the cut.
Although no burials remain in place, there is much evidence of archaeological value to gain from re-planning the graves. Already we can see that a more accurate plan will help us to determine the order of the burials. We can return to the old records of the site in the future and gain new insights into this very significant site, one of the key research aims of our project.
A lot remains to be done on the final day of the project to complete our field research into this important site, revealing more about the site and the features…
A hot day today, and no gas to boil the kettle in the morning, no tea, no good. Meanwhile work continues at a steady pace.
Segments 1 and 2 through the ring ditch are being drawn and recorded in detail. A plan of the feature on the east side of the second segment of the ring ditch suggests the feature may be almost rectangular in plan, and another small excavation is attempting to expose the southern corner to confirm the shape and hopefully reveal the stratigraphic relationship with the ring ditch. More about this feature as the excavation progresses tomorrow.
Segment 3, which appears to have been cut on the eastern side by another later feature, has reached a point where both edges of the cut for the ring ditch have been exposed. The sections of the excavation have been trimmed, nice and sharp for photographing and recording in the next couple of days to round of the excavation of the ditch.
For the first time it feels like we are beginning to understand the deep feature at the southern end of the ring ditch. In the record from 1982 it was suggested that the ditch had been cut away by two separate pits on the east and west sides, we can now see that these were part of a complex of pits whose fills have merged with that of a deep central feature.
We finally had to give up digging in the segment on the southern side of the feature as it became too deep to access within the confines of the narrow cut. We have traced the ridge of the upper egdes of the truncated ring ditch some distance into the pit complex, removing part of the fill of a segment excavated in 1982.
In this area we solved one of the problems thrown up by the preliminary magnetometer survey that we carried out on the site. A large anomaly showed up in an area covered by the trench, which indicated the presence of a major metal object in the ground. The anomaly coincided with the earlier segment excavated through the ditch. We discovered that the steel hinges of a door that was buried in the backfill were undoubtedly the cause of the response. Although it was a useful exercise in prospecting for the appropriate location for our excavation, the anomaly demonstrated the difficulty of re-excavating a site which has been disturbed by excavation in the past.
We have another interesting finds among the mixed pottery sherds we have been getting from the undisturbed areas of the ring ditch, all of which have quite wide date range form prehistoric to medieval. The round flint object is a hammer stone, or rubbing stone, formed by pecking a flint cobble around its whole surface until it forms a rough surfaced sphere. These spherical flint objects are common finds on Bronze Age and Iron Age sites in Thanet and may have been used as a form of pestle for grinding material against another flat stone, or possibly for rubbing and smoothing a hide that was being cured to make leather. It has also been suggested that they were used as a hammer in the process of knapping flint to form more delicate flake tools.
As we come to the last two days of our dig on Thursday and Friday, the final stages of excavating, recording and interpreting this important site will put the team under pressure, but we will make it! Keep following our journal entries for the final results over the next couple of days.
A busy day on site today with a full house team working on all areas of the site. The base of the ditch in the first segment through the ring ditch was found this morning, and a sample taken of the fill at the base. We also found a useful piece of animal bone in the earliest fill, which may be useful for giving a carbon date for the earliest chalky silt deposits that began to settle in the ditch.
Once the base of the ditch was reached, work began to clean and photograph the sections ready for recording. Again we were able to see the wide flat base of the ring ditch, which is perhaps one of the biggest we have seen in Thanet. The depth of the feature presented some problems getting in and out of the steep sided cut, which required specialist equipment – a set of step ladders.
The ditch was comparable the the huge ditches we saw on an excavation by the Trust and Archaeology South East some years ago at Bradstow School in Broadstairs, which were probably the best preserved ring ditch profiles we had seen cut into the chalk geology. The ditch at Bradstow school had a causeway entrance and was unlikely to have been made as a round barrow and was more like a henge like feature. Perhaps the scale of our feature should lead us to think more about what it was built for.
Another fine job of cleaning and photography will let us think about this feature more when the excavation is over and we consider what we have learned from our work.
We also began the process of planning the large ring ditch segments using a series of survey strings recording the edges and breaks of slope of the features with our Total Station. There’s a lot of work over the next day or two to fill out the plan of the site and locate the excavated and drawn sections.
In a segment at the intersection of the ditch and the later feature on the northern side we have begun to find some pottery at last, with one or two sherds well stratified in the upper fill. Although this very mixed late deposit appears to have quite a wide range of material, including Iron Age and possibly some Roman.
At the southern end of the site, we continued to explore a segment (now numbered 5) which is attempting to discover the dimensions of the large cut feature that was cut into the barrow. Surprisingly the steep sides of the inner cut suggests the feature is much larger than we anticipated.
Just at the base we have started to reach a deposit of fine ashy material, perhaps this can give us some clues about its origin, although the date remains difficult to establish as we still do not have any more substantial dating evidence.
A visit from our favourite ceramic specialist has suggested that the ceramic handle we discovered a few days ago in the upper fill of segment 2 through the ring ditch, may in fact be Roman. However, a small rim sherd found in the same deposit further south is medieval Canterbury Sandy ware! A very mixed picture and more thought needs to go into the formation of the upper fill. Plenty more to do in our last few days on the dig…
This is our first day back on site after the weekend, a chance to catch up with where we got to and plan for the next few days.
We are beginning to get to grips with the southern part of the site, where the ring ditch is cut away by a later group of pits, or perhaps by a large single pit.
In places we have had to start emptying a section excavated in 1982, to make sense of the hand written records we have of the excavation carried out in the area in 1982. In doing so we have encountered several artefacts contemporary with that dig, including wrappers for a twix and a six pack bag of hula hoops, both apparently of 1982 vintage. Other material includes a rather stubborn sheet of polythene covering what seems to be an old kitchen door! All this material apparently put in the section to ‘protect’ the archaeology.
Checking the old records it appears that sections were excavated through the ring ditch on a system of compass bearings rather than by considering the orientation of the features, so the sections were undoubtedly not representative of the true relationships between the features, nor very useful in defining the dimensions of the later features, which it seems include a substantial central cut feature. More work is to be done here in the next few days to completely understand the later features.
Digging on the second segment through the ring ditch was completed today and the area was cleaned for photography, ready for recording the plan and sections tomorrow. So far we have established that the wide and straight sided cut of the ring ditch lies on the eastern side of the segment. Once again, we have been impressed by the sheer scale of the ditches that were cut into the hard chalk of the hill top. The care and precision taken to make the ring ditch on this site, demonstrated in the uniform profile and the regular circuit, shows that was almost sculpted out of the chalk geology. In common with many other examples in Thanet, this ditch shows no sign of deviating from its plan where variations were encountered in bedding planes of the chalk . These substantial archaeological features are as ‘architectural’ in their design and careful construction as any standing structure.
On the eastern side of the segment is another pit, cutting through what would have been the interior of the ring ditch. The lower fill was mainly composed of layers of chalk silt alternating with thin bands of chalky soil. No datable finds were found in these layers of chalky fill. More work needs to be done to confirm the shape of this feature in plan, and to prove our suspicion that it is later than the ring ditch, which we can’t prove conclusively from the section we have exposed. Before we do any further work both sections will need to be drawn, a job for tomorrow…
In the first segment, we continued to reduce the chalky fills at the base of the ditch. The star find of the day was part of a large cattle skull, lying at the base of a chalky fill deposit, over one of the lower less chalky fills near the base of the feature. Probably an example of a type of wild cattle known as Aurochs (Bos primigenius), which was distributed widely over Europe may also have been domesticated by the time the ring ditch was made. The skull appears to have been tipped in with the fill and its location does not seem particularly significant to the interpretation of the ring ditch.
However it is an interesting find and casts light on the type of animal that occupied the contemporary landscape with the ring ditch builders, and the sort of meat bearing or working animals that might have been used by the community that built the ring ditches that cover this landscape.
Friday brings resolution to some of our questions and raises more problems for our team of University of Kent students, our stalwart volunteers and the Trust team. When I mentioned that we had finished a segment through the ring ditch yesterday I meant that we thought we had finished.
In our second segment through the ring ditch, a heavy day of digging revealed two distinct cuts on the eastern and western sides. The western cut had a symmetrical profile, with steeply sloping upper edges breaking to a deep straight sided cut and breaking sharply at the bottom at the flat base. This cut is much more like the typical section of a well preserved ring ditch in Thanet.
So why does our first segment which we thought we had completed yesterday (see yesterday’s post) look so different? What are the prospects for the third segment being excavated further along the north eastern edge?
The issue was resolved today when it turned out our first ditch segment, with the strange benched profile and possible recut, was excavated only to the top of a compacted fill of chalk rubble and silt. Having pondered the situation with a fresh pair of eyes on the feature (thanks PCH) the chalk had to go! Two tons of chalk rubble stand no chance against the team armed with finely honed skills with a mattock and considerable progress was made toward matching the ditch profile with its neighbor immediately to the north, solving the problem of why these two segments appeared so different to each other.
The second segment presents a new problem now, with a clear second cut feature, which seems to have been excavated on the inner edge of the ring ditch. Is it discrete pit or evidence for a much more substantial recut ditch? Time and much more excavation will tell.
Further north the third segment excavated through the ring ditch to add more to our understanding of the plan of the ditch circuit , looks as if it will also end up being as deep as the other two segments.
There’s more progress to report on the southern side of the site, where we have been excavating our segments through a later feature, possible a quarry pit, but perhaps a more substantial feature. A section through undisturbed deposits and another emptying a previous section excavated in 1982 have found among some shallower pit cuts. a steep sided cut feature which extends into both areas of excavation. Are these simply random chalk quarries or is this one of the deep cut sunken features, possibly once associated with structures, that we have encountered many times before in Thanet? We have more definition of our targets here now but the questions are not resolved yet…
Lucky we have another week to go! More updates after a well earned weekend of rest for the team.
One segment excavated through the ring ditch was completed today, the cut photographed and the section drawn.
This segment proved difficult to interpret, with the platforms either side of the cut and the V shaped gully at the base, the profile is unusual for a round-barrow ditch in Thanet. The fills were fairly undifferentiated making the stratigraphy harder to work out and the working theory is that a flat based ditch was recut by a later V shaped ditch on a similar alignment.
More complicated is that a second segment meant to show us more of the ditch, has a very different character. At the moment it appears that two very deep cut features, pits or deep ditches, are present not far from the relatively shallow profile to the south.
The excavation continues in this area and we hope to work this one out tomorrow…
Work is also continuing on the later pits that cut the ring-ditch on its southern side, with a very complicated picture emerging of small intercut pits, perhaps associated with a larger cut feature. These are perhaps medieval or possibly Roman in date, but dating evidence has been sparse to date. We hope to get a clearer idea of this (and some pictures) tomorrow.
For anyone who appreciates Umberto Eco, here’s an example of a journey into hyper-reality, a ‘real fake’.
A collector’s replica of an ancient Athenian coin (read about the real thing here) found on the spoil heap at our site with a metal detector (the field was used for car boot fairs).
Simultaneously the most historic and iconic image and yet absolutely artificial and completely out of place. Now where else have we heard of an artificial owl. Just look into my eyes…
A great deal of activity today and a few visits, planned and unexpected. We made a great deal of progress with excavating sections through the undisturbed northern area of the ring ditch. Our first section reached the bottom of the ditch, showing it had a symmetrical, but unusual profile (photo update tomorrow).
However, the northern section proved less easy to interpret and it may be we have evidence that the ditch had possibly been re-cut around the circuit of the ditch, or had been cut by a later linear ditch.The features and their relationships are not clear yet and more work needs to be done in the next few days. The recut may explain why the significant finds from the upper fill of what should be a Bronze Age feature were a medieval jug handle and a peg tile pierced with a hole for hanging the tile on a roof.
We also carried on with a series of small sections to explore the later features cut into the southern side of the barrow. These may be a series of pits or perhaps a larger feature. There’s more to be done in this area and we really appreciated the help of two of our regular volunteers who joined our University of Kent student excavators for the day.
Later in the afternoon we were visited by the team from the Powell-Cotton Museum, where many of the finds from the earlier excavations on the site are stored. A good opportunity to match the finds in the Museum with their context in the landscape; and a chance to discuss how we can work with our local Museum in the future.
We began excavating sections through a stretch of the ring ditch which has not been sampled before. The edge of the trench at the northern end of the feature had to be defined so we could locate the outer edge and position one section across the ditch.
Preliminary geophysical survey with a magnetometer showed that a composite plan of the area produced after the excavations in 1981/82 had a serious error, placing the ring ditch around 17m too far south of its actual location. It is becoming clear that the feature’s real location in the landscape is more significant to the physical landscape. occupying the plateau at the crest of the downland ridge overlooking Pegwell Bay. This space, with horizons falling away on all but the north west side where the plateau continues, is unique in the natural landscape in this location. The position shares similarities with the location of many round-barrows and other ring ditch features in Thanet, the locations owing more to a careful choice of local topographic conditions rather than a reference to a wider cosmology.
In a later period, as yet undetermined, the southern edge of the round barrow was cut by a series of pits and possibly a large cut feature. We bagan to try to define the dimensions and shape of the feature by excavating another small section into it, As we make progress with this the nature of the later features will be more clearly defined and perhaps dated in the next few days of work at the site.